Philippine National ID Size in CM and Inches
Many people want to know the size of the Philippine National ID. You might need this information to choose an ID holder, scan your card, print an ePhilID, or check whether a printed copy has the correct size. This guide explains the size of the PhilID card and ePhilID in centimeters, millimeters, and inches. It also covers the official information published by the Philippine Statistics Authority (PSA) and the details we could not verify.
National ID Size at a Glance
The Philippine National ID comes in three formats: the plastic PhilID card, the paper ePhilID, and the Digital National ID. Each format has a different size or display method.
The measurements above follow the standard size used for many ID cards. If you need the exact size of your own card, measure it with a ruler.
The table below shows the measurements of all three formats.
Format | Millimeters | Centimeters |
|---|---|---|
PhilID card (standard ID card size) | 85.60 x 53.98 mm | 8.56 x 5.40 cm |
ePhilID (A5 paper) | 148 x 210 mm | 14.8 x 21 cm |
Digital National ID | No fixed print size | No fixed print size |
Size of the PhilID Card in CM and Inches
The PhilID is the plastic version of the Philippine National ID. PHLPost delivers the card to the registered address. The following sections explain its standard size and clarify where these measurements come from.
PhilID Size in CM, MM, and Inches
Many ID cards, bank cards, and driver’s licenses use the ISO/IEC 7810 ID-1 standard. This standard gives the following card measurements:
Unit | Width | Height |
|---|---|---|
Millimeters | 85.60 mm | 53.98 mm |
Centimeters | 8.56 cm | 5.40 cm |
Inches | 3.37 in | 2.13 in |
The standard also gives a card thickness of about 0.76 mm, with a permitted difference of 0.08 mm in either direction. It also specifies rounded corners.
These thickness and corner details come from the ID-1 standard, not from the PSA. The PSA pages checked for this guide do not state the thickness or material of the PhilID card.
Why Do Some Websites Show 3.375 Inches?
Some card printing websites use the name CR80 for this standard card size. They often list the measurements as 3.375 by 2.125 inches.
The ISO standard gives the measurements as 85.60 by 53.98 mm, which convert to approximately 3.37 by 2.13 inches. The difference comes from rounding, so both sets of measurements refer to almost the same card size.
Size of the ePhilID in CM and Inches
The ePhilID is the printed paper version of the National ID. It is larger than the plastic card and does not fit in a standard wallet card slot.
ePhilID Size in CM and Inches
A PSA regional office article states that the ePhilID measures A5 size, or 14.8 x 21 cm. The table below shows these measurements in different units.
Unit | Width | Height |
|---|---|---|
Millimeters | 148 mm | 210 mm |
Centimeters | 14.8 cm | 21 cm |
Inches | 5.83 in | 8.27 in |
Size of the Digital National ID
The Digital National ID is the electronic version of your National ID. You can view it through the eGovPH app. Unlike the plastic PhilID and paper ePhilID, it does not have one fixed physical size.
Keep these points in mind:
National ID Size Compared With Common Cards
Comparing the National ID with other cards can help you choose the right holder or understand the difference between the paper and digital formats.
Use the table below to compare their measurements.
Item | Size in cm | Size in inches |
|---|---|---|
PhilID card (standard ID card size) | 8.56 x 5.40 cm | 3.37 x 2.13 in |
ATM, credit, or debit card (ID-1) | 8.56 x 5.40 cm | 3.37 x 2.13 in |
ePhilID (A5 paper) | 14.8 x 21 cm | 5.83 x 8.27 in |
A4 paper, for reference | 21 x 29.7 cm | 8.27 x 11.69 in |
Digital National ID | No fixed print size | No fixed print size |
If your ePhilID is printed on paper larger than A5, ask your registration center which paper size PSA expects. Do not assume that every printed copy must use A4 paper.
Why Does the National ID Size Matter?
Knowing the size of your National ID can help you choose the right accessories, prepare copies, and understand the differences between its formats. Here are some common reasons people check ID measurements:
Protect your personal information when sharing an ID image. Do not post your PhilSys Number or QR code publicly online.
Conclusion
The standard ID card size is about 8.56 cm by 5.40 cm (3.37 by 2.13 inches), but the PSA pages checked for this guide do not confirm that these are the exact measurements of the plastic PhilID. The paper ePhilID is A5 size, measuring 14.8 cm by 21 cm (5.83 by 8.27 inches), according to a PSA regional office. The Digital National ID appears on your phone and must not be printed on a plastic card. For a school ID, ask the school for its official measurements.
You now know the reported sizes of the three National ID formats, the difference between centimeters and inches, and which measurements still need official confirmation. Before printing a document or ordering an ID holder, check the relevant PSA information or measure your own card.
